Eco Friendly Household Appliances
Environmentally friendly appliances: Energy efficient appliances and their use of...
We all know or think we know how to save energy and what to look for in our appliances, But read the following information from the Australian government web site and you will be amazed how much difference a little thought can make to your energy conservation and play your part in protecting the ozone layer and indeed the planet!! The following information is taken from the Australian governments web site and just shows how much of a conscious effort they are making to bring to the publics attention the problems and a few solutions to the ever worrying environmental problem that faces us all....MORE GOVERNMENTS SHOULD DO LIKEWISE!!
Household appliances, many of which are referred to as ‘white goods’,
account for the majority of household energy consumption and greenhouse
gas emissions.
By choosing these appliances carefully and with the environment in mind you can save money and
reduce your environmental impact without compromising lifestyle.
CHOOSING AND USING WHITE GOODS
Apply the following guidelines
Avoid buying appliances that you don’t really need.
This sounds pretty obvious I know BUT!! If you need to buy an appliance, choose one that is the right size for your
needs and is as efficient as possible. Appliance rating schemes can help you to
select the most efficient appliance.
Operate appliances efficiently by closely following the
instructions.
Maintain appliances carefully.
Turn appliances off when not in use, preferably at the power
outlet. This I must admit is my biggest flaw and many other people I speak to have the same problem...the plug is concealed behind the unit and I cant be bothered to get at it....but it is amazing the power these appliances use in stand by....read on....Many appliances continue to draw "standby" power when switched off,
contributing up to ten percent of household electricity use. Most people do not realize this is probably the easiest way to save electricity.
Purchase the most efficient appliance available by choosing
the highest rating product.
Seek advice from consumer groups, and the internet.
Think about the best layout and placement of appliances to
maximise efficiency when designing a new laundry or kitchen.
Do you really need it?
This is a question all us fellas ask our partners and not because we are trying to be energy efficient...
This is the first question to ask when you are thinking of buying an
appliance.
For example: Do you really need a clothes dryer when you could use
the sun and a clothesline without cost? |
|
Do you really need a second fridge?
Can you think of a way to do without an extra appliance, to save both the
cost of buying and running it and the environmental impact of its use,
manufacture and disposal?
Size considerations
Buy the right sized appliance to suit your needs. A large model with the same
star rating as a smaller model uses more energy and generates more greenhouse
gas. Ensure the retailer considers what size appliance you need.
Ongoing cost
When choosing an appliance many people ignore the ongoing costs of
maintenance and operation.
Ongoing running costs can easily exceed the original purchase
price of an appliance so consider the full lifetime cost when choosing an
appliance.
Energy efficient appliances cost less to run and have less environmental
impact than similar appliances with lower energy efficiency. Using efficient
appliances can save you hundreds of euros/dollars/pounds etc each year in running costs.
The Energy Rating Scheme is a mandatory national
labelling scheme for:
- Refrigerators.
- Freezers.
- Clothes washers.
- Clothes dryers.
- Dishwashers.
- Air conditioners.
|
|
Look for the Energy Rating Label that shows the star rating and other useful
information about energy consumption. Choose an appliance with a high star
rating.
Add the purchase cost and the lifetime running cost to get a more accurate
picture of the total cost of an appliance.
Appliances with a higher star rating generate fewer greenhouse
gas emissions.
The Energy Rating Label must be displayed on appliances for sale. It gives a
star rating between one and six stars. The greater the number of stars the
higher the efficiency. Total energy consumption in kWh per year under test
conditions is also shown (in the red box). If two suitable appliances have the
same star rating choose the one with the lower energy consumption.
Reverse cycle air conditioners can be used for heating or cooling and their
efficiency is different for the two modes of operation. The Energy Rating Label
for reverse cycle air conditioners shows separate star ratings and energy
consumption figures for heating (in red) and for cooling (in blue).
A detailed website (www.energyrating.gov.au) provides additional information
on the Energy Rating Scheme. The site lists the energy rating and approximate
annual energy costs for all appliances on sale in Australia. You can search for
an appliance that best meets your needs. The site also provides tips on
appliance selection and background information on how appliance ratings are
determined.
Other Appliances
Televisions, video, CD and DVD players and recorders do not carry energy
rating labels in many parts of the world, neither do computers, scanners or printers.
Nevertheless the collective energy demand of these appliances in a modern
household is significant. Taken together, the electrical power use of these
commonly used appliances may outweigh that consumed by ‘traditional’ white
goods.
The rise of digital technologies has lead to the emergence of ‘convergence’
in which previously unrelated devices operate interactively with one another. As
an example, record players, radios, cameras and telephones used to be quite
separate devices but now consumers can buy mobile phones that play music,
receive radio programs and take photographs. In the home, this phenomenon of
convergence has lead to such things as refrigerators that contain a computer,
and the increasingly popular ‘home theatre’.
Turn off appliances not in use where possible, although this
is not always as easy as it sounds. A continual power draw is becoming the
default condition for many appliances. As electronic devices have become more
sophisticated they have become more and more likely to have ‘sleep’ or standby
modes rather than a ‘hard off’ switch that disconnects the mains from all
electrical circuits in the appliance. The average power consumption of home theatres in typical
standby mode alone is equivalent to leaving a light continuously switched
on.
USING AND CHOOSING ENVIRONMENTALLY FRIENDLY APPLIANCES
Fridges and freezers
Choosing a fridge or freezer
Running a six star 360 litre fridge will produce almost half a tonne less
greenhouse gas each year than a three star model. AMAZING!!!
Buy appliances that are the right size, especially freezers as their energy
demand is high. A larger model will use more energy than a smaller one with the
same energy star rating. One large fridge will usually be more efficient than
two smaller ones.
Look for features such as easily adjustable shelving, easy access to the
thermostat, simple thermostat controls, separate thermostats for fridge and
freezer compartments, a door-open alarm and rollers or castors that will make
cleaning and operating the fridge easier.
Chest freezers are usually more efficient than upright models as cold air
does not escape every time you open the door. Upright freezers with enclosed
drawers (not baskets) are a good compromise. Courtesy of Fisher & Paykel
Through-the-door features such as cold water dispensers and ice-makers use
more energy and cost more. Avoid these if possible.
Upright units with one door above the other are generally more
efficient than units with side by side doors.
A cool cupboard will keep many fruits and vegetables well in most climates,
allowing you to choose a smaller fridge. Cool cupboards should be located in the
coolest part of the house and have good airflow in at floor level and out at the
ceiling.
Using your fridge or freezer
Place the fridge or freezer in a cool spot out of direct
sunlight and away from cookers, heaters and dishwashers.
Ensure 75mm air space around all sides of the cabinet. If in an alcove make
sure the top is also ventilated.
Make sure the door seal is clean and in good condition. It should hold a
piece of paper tightly in place when shut.
Set the fridge thermostat to between 3°C and 5°C. The
freezer should be set to between -15°C and -18°C. Every degree lower requires
five percent more energy. A fridge thermometer is a good investment.
Avoid overloading the fridge or freezer.
Try to leave about 20 percent free space for air circulation.
Defrost manual models regularly or when ice is more than five mm thick.
Turn the second fridge off when not needed.
Do not put it in a hot garage or veranda.
Avoid placing hot food in the fridge.
Dispose of old fridges properly to avoid release of ozone damaging CFCs. Your
local council should be able to offer advice.
Clothes washer
Choosing a washing machine
Choose a washer that’s the right size for your needs. An oversized model will
often be filled with partial loads.
Select the most energy and water efficient model.
Front loaders are usually more water and energy efficient. They are gentler
on clothes, use less detergent and save space as they can be installed under a
bench. They usually have a higher spin speed so clothes come out dryer. Some
have only a cold water connection.
Top loaders usually use more water despite shorter wash times. They may be
less expensive to buy but are often harsher on clothes. A suds saver feature is
very desirable.
Look for models with dual water connection, cold wash cycles and auto load
sensing or load size selection. Heating the water for a hot load can generate up
to 4kg of greenhouse gas - a cold wash will produce less than 0.5 kg.
Models with a high spin speed and reverse tumble action are also desirable,
especially if you use a clothes dryer.
Look for an economy cycle.
Using your washing machine
Wash a full load rather than several smaller loads and use suds saver if
available. Don’t use too much detergent. Making detergent produces a lot of
greenhouse gases and using too much pollutes our waterways.
Use the Economy Cycle.
Most of the energy used in washing clothes is for heating the
water. Use cold water where possible.
Clothes dryer
Choosing Clothes Dryers
Consider buying a gas fired or heat pump model clothes dryer. They are more
expensive to buy and install but much cheaper to run.
Drying a load of washing in an electric dryer generates more
than 3kg of greenhouse gas.
Look for an auto-sensing feature, easily accessible lint-filters and other
features such as reverse tumbling and special fabric cycles.
Using clothes dryers
Use a clothes line or rack to dry instead of a dryer.
Avoid over loading or over drying.
Do not put wet clothes in the dryer. Part dry or spin dry them first, using
the maximum spin speed of the washer.
Clean the lint filter after each load.
Externally vent the dryer to remove moist air from the room.
Run the dryer on medium instead of high.
Dishwashers
Choosing a Dishwasher
Choose the right size for your needs so you will not always be washing
partial loads. Two drawer models are available and can be more efficient in
households where regular small loads are required.
A well designed dishwasher will wash better at lower
temperature and with less detergent than a poorly designed one.
Select the most energy and water efficient model.
Look for models with hot and cold connections or cold connection only. Hot
connection only models use much more energy as the whole cycle will use hot
water, not just the wash phase.
Research performance well. Basket and rack design is important.
Look for an Economy Cycle.
Using a dishwasher
Avoid rinsing dishes under the hot water tap.
Scrape plates well before packing the dishwasher.
Always clean the filter between washes.
Run the dishwasher only when fully loaded.
Use cold water cycles as much as possible in dishwashers. Select the cycle
with the lowest temperature and the minimum time to get the job done.
Avoid using drying cycles - open the door instead.
Use the Economy Cycle.
Audio Visual Appliances
TVs with plasma screens or large cathode ray tube displays use something like
300 watts to operate whilst the new generation of LCDs are much more efficient.
The ubiquity of computers with associated scanners, printers, additional
displays, 24 hour internet access etc., make them a significant part of energy
use.
Wherever possible, replace computer CRTs (cathode ray tubes) displays with
‘flat’ screen LCDs (liquid crystal displays) that use much less power. They are
also less tiring to look at for extended periods.
Other equipment
Swimming pool and spa equipment can consume large amounts of energy. Pumps
and heaters should be as efficient as possible and be used as little as
practicable.
If you are looking for the best energy performing whitegoods, then go to http://www.energyallstars.gov.au/.
Use the site to compare products, work out how much running them will cost, and
how much energy and water they will use. Only the most energy efficient models
are listed..although this is an Australian site you can still compare prices and energy efficiency...any visitors who have similar european web site addresses...please forward.
The Australian Consumers’ Association (ACA) regularly
undertakes benchmark testing of products, including a full range of
appliances.
The results of these benchmark tests are published in the ACA magazine CHOICE
and are available on-line at the ACA website at www.choice.com.au for a fee.
Most public libraries subscribe to CHOICE.
The tests often provide information on energy efficiency and environmental
impact that can assist in deciding which appliance to buy.
The tests also cover a range of other features such as price, safety,
warranty details and performance that can help you to choose the best
appliance.
When designing a new kitchen or laundry, think about
the best layout and placement of appliances to maximise efficiency.
Refrigerators and freezers should be located out of direct sunlight and away
from other sources of heat such as ovens and stoves.
This is an important consideration in kitchen design.
Appliances that require hot water should be located as close to the hot water
service as possible to reduce heat losses in pipes..
Other Considerations
Where possible choose appliances that have a high rating for
water efficiency.
[See: Saving water at home ]
Principal author:
Chris Riedy
Contributing author:
Geoff Milne
All information gathered from http://greenhouse.gov.au a fascinating site and well worth a visit
Back to top |